Teknologi
PEMBERSIHAN DALAMAN
The radial internal clearance of our products is same as the value of GB/T4604-93(equivalent of ISO 5753-1991),usually, the clearance of our products is basic group 0(Co), as well as other clearance at your request,the clearance can be divided the following group.
The radial internal clearance of our products is same as the value of GB/T4604-93(equivalent of ISO 5753-1991),usually, the clearance of our products is basic group 0(Co), as well as other clearance at your request,the clearance can be divided the following group. | |||||||||||
RADIAL INTERNAL CLEARANCE OF STANDARD RADIAL BALL BEARINGS | |||||||||||
Unit: um | |||||||||||
NOMINAL BORE | CLEARANCE | ||||||||||
DIAMETER | |||||||||||
d(mm) | GROUP 2 | GROUP 0 | GROUP 3 | GROUP 4 | GROUP 5 | ||||||
Corresponding | C2 | C0 | C3 | C4 | C5 | ||||||
OVER | INCL. | MIN | MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | MAX |
2.5 | 6 | 0 | 7 | 2 | 13 | 8 | 23 | - | - | - | - |
6 | 10 | 0 | 7 | 2 | 13 | 8 | 23 | 14 | 29 | 20 | 37 |
10 | 18 | 0 | 9 | 3 | 18 | 11 | 25 | 18 | 33 | 25 | 45 |
18 | 24 | 0 | 10 | 5 | 20 | 13 | 28 | 20 | 36 | 28 | 48 |
24 | 30 | 1 | 11 | 5 | 20 | 13 | 28 | 23 | 41 | 30 | 53 |
30 | 40 | 1 | 11 | 6 | 20 | 15 | 33 | 28 | 46 | 40 | 64 |
40 | 50 | 1 | 11 | 6 | 23 | 18 | 36 | 30 | 51 | 45 | 73 |
- > Struktur Galas
- > Bahan galas
- > CAGE / RETAINER
- > REKA BENTUK PENGHANTARAN & SEAL
- > TOLERANSI BEARING BOLA
- > PENGGUNAAN DAN Bising
- > PEMBERSIHAN DALAMAN
- > PENERBITAN
- > KESESUAIAN SHAFT / RUMAH
- > KEROSAKAN KERANA
- > How to prolong the service time of bearings
- > The characteristics and causes of bearing grinding cracks and preventive measures
- > Item Interchange of miniature bearing